Manton VW Pushrods, 3/8" x .035" Wall Chromoly, 11.500 Un-Cut Length, 102-035

Manton VW Pushrods, 3/8" x .035" Wall Chromoly, 11.500 Un-Cut Length

Manton Series 1 VW Pushrods are designed for mild performance engines that utilize low valve spring pressures. Made from 3/8" diameter 4130 chromoly tubing that can withstand up to 140,00 tensile strength. The tips are 5/16" diameter and have been CNC machined from wear resistant 8620 bar stock that has been case hardened, cryogenically treated and tempered to assure proper seating in both lifter and rocker arm bore cups and will not wear out while under extreme conditions. This pushrod has an overall length(OAL) of 11.500″ (292.1mm) with the tip installed and can be cut down up to one inch. 

Installation Note: These pushrods come un-cut and un-assembled and will require being cut to the proper length and assembled. They are longer than stock and designed for performance applications. OAL is the overall length with both tips installed.

Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purchase to ensure this part is correct for your project.  

Manton Pushrods, 3/8" x .035" Wall Chromoly, 11.500 Un-Cut Length, Sold as Set